- Axis Camera Software
supports H.264, MPEG4, MJPEG compressions
Visec supports all Axis Camera models including:
AXIS 206,AXIS 207,AXIS 207MW,AXIS 207W,AXIS 210,AXIS 210A,AXIS
211,AXIS 211A,AXIS 211M,AXIS 211W,AXIS 221,AXIS ,223M,AXIS M1011,AXIS M1011-W,AXIS
M1031-W,AXIS P1311,AXIS Q1755,AXIS 209FD,AXIS 209FD-R,AXIS 209MFD,AXIS 09MFD-R,AXIS
216FD,AXIS 216FD-V,AXIS 216MFD,AXIS 216MFD-V,AXIS 225FD,AXIS M3011,AXIS P3301,AXIS
P3301-V,PTZ network ,AXIS 212 PTZ,AXIS 212 PTZ-V,AXIS 213 PTZ,AXIS 214 PTZ,AXIS
215 PTZ,AXIS 215 PTZ-E,AXIS 231D+,AXIS 232D+ AXIS 233D,AXIS Q6032-E
Visec also supports almost all your other cameras
Web cams, cctv
camers Arecont, IQ, IQ EYE, ACTI, Panasonic, Airlink, Aviosys, Connectec, Dlink,
Genius, EVo, Gadspot, Intellinet, Lynxs,NetSnap, Mobotix, Panasonic, Pixord, Raytalk,
Sweex, Toshiba, Trendnet, Vision Tech,Vivotek, generic support for standard mjpeg,
and is a hybrid for capture cards, USB capture devices and more.)
Axis camera software has an easy to use interface
discovery of all Axis cameras
-Easily Scan the network
-Internal DNS remembers
MAC address of Axis Cameras
for larger view
supports up to 8 separate monitors as well as the Axis controller, (or use
any Windows Game X,Y,Z game controller)
Plate Recognition - LPR
Visec does LPR using
all Axis Cameras and works perfectly using the models Axis 211, Axis 221, or Axis
Input / Output -IO Software
supports supports Axis onboard IO's for full Access Control
Axis Cameras have I/O's in the back.
This picture shows the back side of an
how an Axis IO and Visec software for Axis Cameras can operate.
When inputs or ouputs are triggered you can arrange for events to occur.
example, when a door opens automatically -> turn a light on and record for
Or when a door
sensor is triggered you can choose a PRESET of an Axis PTZ to move to that location.
E.g. a door opens in an apartment complex, the Axis PTZ camera then swings to
that AXIS preset location.
The range of devices that can be connected to an input port
of a network camera or video server is almost infinite. The basic rule is that
any device that can toggle between an open and closed circuit can be connected
to a network camera or a video server.
magnetic switch detecting opening of doors or windows||When
circuit is broken (door is opened) the camera can take action, sending full motion
video and notifications|
infrared detector (PIR) ||A
sensor that detects motion based on heat emission||When
motion is detected, the PIR breaks the circuit and the camera can take action|
sending full motion video and notifications
active sensor that measures air pressure in a room and detects sudden|
drops (can be powered by the camera)
an air pressure drop is detected, the detector breaks the circuit and the camera
can take action sending full motion video and notifications|
usage example: A camera attached to a window switch and to an alarm system/siren
The output port's main function is to allow the network
camera or video server to trigger external devices, either automatically or by
remote control from a human operator or a software application.
relay (solenoid) that controls the opening and closing of door locks||The
locking/unlocking of an entrance door can be controlled by a remote operator (over
siren configured to sound when alarm is detected||The
network video product can activate the siren either when motion is detected using
the built-in video motion detection (VMD) feature or using "information"
from a digital input|
security system continuously monitoring a normally closed or normally open alarm
network video product can act as an integrated part of the alarm system serving
as a sensor and enhancing the alarm system with event triggered video transfers|
Visec -Software for Axis Cameras - click here